Card Types - Magicard 360 NEO User Manual

Card Types

Pure PVC Card stock or laminated PVC/Polyester Cards are available. The latter are more durable and better
suited to heavy use and heat lamination when required. For access control and Smart Card applications, your
supplier should provide the appropriate type for direct to card printing. For consistent results, stick to a single
variety of good quality Cards.
Generally, there are two standard sizes of card that can be used with the printer. These are as follows:
Physical Dimensions
CR80 = 3.375" x 2.125" (85.7 mm x 54.0 mm) (w x h)
CR79 = 3.303" x 2.051" (83.9 mm x 51.0 mm) (w x h)
Card thickness should be as follows:
Standard – 0.030" (0.76 mm).
Minimum – 0.020" (0.51 mm).
Maximum – 0.040" (1.02 mm).
Do not use any cards outside the Printers card thickness specification 0.50 - 1.27mm (20 – 50 mil). To do so
may result in a card jam or damage within the printer and may not be covered under the manufacturer's
warranty.
Pixel Dimensions
CR80 Pixel dimensions:
1013 x 642 (w x h)
CARD VARIANTS
Card Part Numbers
M9006 - 793
M9006 – 794
M9007 - 011
M3610 – 054
M9006 – 796
M9006 – 797
E9323
360 NEO Card Printer – User Guide
Product Variant
Premium Blank White Cards – CR80
Blank White Cards with Magnetic Stripe – CR80
Self-Adhesive Blank White Cards – CR80
Self-Adhesive Blank White Cards – CR80 (USA)
Holopatch Blank White Cards with Gold Square – CR80
Holopatch Blank White Cards with Gold Square and Magnetic Stripe – CR80
Blank Rewriteable Card front & standard PVC back
22
Width