Table of Contents
Advertisement
The Network and Configuration window allows the user to set (and store) an IP address in the printer. The user
also has the option to choose a static or dynamic IP address. (Static IP settings are generally more commonly
used with networked printers).
4
6.
Select the
Use Static Network settings
user's network).
7.
Click the
OK
button. This will exit the setup windows and save the user's settings.
Finally, connect the network (LAN) cable to the Ethernet port of the rear of the printer and then power-cycle
the printer (remove the power supply connector and then refit. Allow the printer fully initialise.
8.
When the printer is fully initialised, the user can check the stored configuration using the front panel buttons
as follows:
Select
Menu
>
More
additional details).
360 NEO Card Printer – User Guide
Setting the Printer Network configuration
option
>
Network Info
>
IP Address
(4)
(together with the other network settings applicable to the
(please also refer to the Menu options on page 9 for
26
Advertisement
Table of Contents
