Introduction; Batch Application Capabilities; System Requirements; Minimum Required Os Version - Opticon OPN2002 Applications Manual

Hide thumbs Also See for OPN2002:

Demo application manual (19 pages)

Manual (19 pages)

User manual (14 pages)

Table of Contents

The batch demo application demonstrates the capabilities of the OPN2002/3/4 to store barcode data in a file and retrieve this file from a local PC. The files can

either by retrieved by using the OPN2002/3/4 as an USB Mass Storage Device (MSD) or can be received using the NetO protocol by using USB-VCP and/or the

CRD2000 multi cradle (for OPN2002 only). Since the OPN2002/3/4 terminals do not have a display to show any instructions, this demo application implements

a user interface that consists entirely of using just the two keys to scan barcodes. This brief setup guide describes all features as well as handling instructions.

More product details, additional support and more configuration options to customize this application to your own preferences (by using the Universal Menu

Book) will be updated at

www.opticonUSA.com

The following features are currently supported:

• Scanning and storing of barcodes into a database file on the internal RAM disk

• Retrieving the barcode data file via a local PC or laptop using the NetO protocol by either USB-VCP or the CRD2000 multi cradle

• Using the OPN200/3/4 as an USB Mass Storage Device (MSD) to retrieve the barcode data file

• OSE Universal Menu Book support to configure all barcode decoders, prefixes and suffixes, read modes and various other options

• Storing of configurations in non-volatile memory to allow all settings to be restored after a reset

• Configuring output format of the database file

• Software upgrading by USB-VCP or the CRD-2000 multi cradle (RS232) using Appload

Minimum Required OS Version

For USB-VCP and CRD2000 support, this demo application requires OS version:

• OPN2002: RBGV0212 (or higher)

• OPN2003: RBFV0212 (or higher)

• OPN2004: RBIV0007 (or higher)

For USB-MSD (Mass Storage Device) support, this demo application requires the OS version:

• OPN2002: RBGV0220d (or higher)

• OPN2003: RBFV0220d (or higher)

• OPN2004: RBIV0007 (or higher)

To check the currently installed OS versions, it is possible to use Appload (Select: 'Utilities' > 'Show software version'). To check the currently installed application

version, it is also possible to transmit both the OS and application version by USB-VCP by reading the 'Z1' menu label (see

NetO32

This demo application can use Opticon's NetO32 host PC application to be able to transfer files from the OPN to a PC or laptop. This application can be downloaded

from the link below. The minimum required NetO32 version is 2.07.

http://ftp.opticonusa.com/Downloads/NetO32.zip

Appload

To be able to install this application onto your OPN, you will need to have Appload installed on your PC. Make sure you have the latest version of Appload, which

can be found on our web site. Please read the

http://ftp.opticonusa.com/Downloads/Appload.zip

Software Updates

In the future, additional features, and updates are likely to be implemented into the OS and this application. To find out if there are software updates available,

please check our web site (www.opticonUSA.com).

All available software and documentation for the OPN2002/3/4 can be found at