Ce Marking; National Restrictions; Operating Frequency; Intended Use Of The Equipment - Teldat WWAN Enabler Installation Manual

4 Compliance
The EC declaration of conformity and additional product documentation can be accessed here:
http://www.teldat.com/conformity

4.8 CE Marking

This equipment is in conformity with the CE procedures and marking.

4.9 National restrictions

In accordance with Article 10 of 2014/53/EU, we inform you that national restrictions and requirements may apply for
authorization purposes. These can change over time. Teldat S.A. recommends that you check with local authorities
for the latest status of national regulations.
This product is supplied with antennas in order to fulfill local regulations. Do not choose other antennas. To comply
with power limits and RF exposure requirements, the antennas used for this transmitter must be installed in such a
way that they are always separated from nearby persons by a minimum distance of at least 20 cm.

4.10 Operating Frequency

To check the device's operating frequencies, see

4.11 Intended use of the equipment

The WWAN Enabler can be deployed as a Customer Premises Equipment (CPE) in enterprise branch offices or in
environments managed by the service provider.
This product must only be used indoors.
24
Radio Information on page 34.
Teldat S.A.
WWAN Enabler