Technical Data - Beckhoff EL9930 Operating Instructions Manual

Profisafe segment end terminal
Hide thumbs Also See for EL9930:
Table of Contents

Advertisement

3.2

Technical data

The current certificates of all TwinSAFE products with the underlying standards and directives can be found
at https://www.beckhoff.com/en-en/support/download-finder/certificates-approvals/.
Product designation
Number of inputs/outputs
Supply voltage (SELV/PELV)
Current consumption via E-bus
Power dissipation of the terminal
Dimensions (W x H x D)
Weight
Input process image
Output process image
Permissible ambient temperature (operation)
Permissible ambient temperature (transport/
storage)
Permissible air humidity
Permissible air pressure (operation/storage/
transport)
Climate category according to EN 60721-3-3
Permissible level of contamination according to
EN 60664-1
Inadmissible operating conditions
Vibration / shock resistance
EMC immunity / emission
Shocks
Protection class
Permitted operating environment
correct installation position
Approvals / identification
EL9930
EL9930
0
24 V
(–15% / +20%)
DC
approx. 120 mA
typically 1 W
12 mm x 100 mm x 68 mm
app. 42 g
Dynamic in accordance with the configuration in
TwinCAT 3
Dynamic in accordance with the configuration in
TwinCAT 3
-25 °C to +55 °C
-40 °C to +70 °C
5% to 95%, non-condensing
750 hPa to 1100 hPa
(this corresponds to an altitude of approx. -690 m to
2450 m above sea level, assuming an international
standard atmosphere)
3K3
(the deviation from 3K3 is possible only with optimal
environmental conditions and also applies only to the
technical data which are specified differently in this
documentation)
Level of contamination 2
The terminal must not be used under the following
operating conditions:
• under the influence of ionizing radiation (exceeding
the natural background radiation)
• in corrosive environments
• in an environment that leads to unacceptable soiling
of the Bus Terminal
conforms to EN 60068-2-6 / EN 60068-2-27
conforms to EN 61000-6-2 / EN 61000-6-4
15 g with pulse duration 11 ms in all three axes
IP20
In the control cabinet or terminal box, with minimum
protection class IP54 according to IEC 60529
see chapter Installation position and minimum
distances [} 19]
CE
Version: 2.0.0
Product description
15

Advertisement

Table of Contents
loading

Table of Contents