Operator Comfort - Bell B35E 6X6 ADT Operator's Manual

Keep Machines Secure
When machine is in storage lock doors, battery box,
fuel cap etc. and remove any keys.
Remove batteries When parking indoors, put large
equipment in front of exits and lock your storage
buildings.
When parking outdoors, store in a well-lit and
fenced area. Make note of suspicious activity and
report any thefts immediately.
Notify your BELL dealer of any losses.
Park Indoors And Out Of Sight
• Park large equipment in front of exits.
• Remove batteries when in storage.
• Lock cab doors, windows, latches, battery box
and fuel cap.
• Lock the building.
When Parking Outdoors
Park in well-lit, fenced area.
Remove batteries when machine is in storage.
Lock cab doors, windows, latches, battery box and
fuel cap.

Operator Comfort

Operator comfort can be improved by reducing vi-
brations, the following guidelines can help:
OPERATING INSTRUCTIONS
Machine Operation
1. Drive around obstacles and rough terrain.
2. Slow down when it is necessary to travel over
rough terrain.
3. Steer Gently
4. Brake Gently.
5. Operate the bin correctly to prevent hard cylin-
der end-stop impacts.
Machine Suspension Maintenance
1. Maintain tyre pressures according to BELL
specifications.
2. Check the suspension strut heights and main-
tain to BELL specifications if necessary.
3. Check suspension linkages to ensure correct
operation.
4. Adjust the seat height so that the seat does not
hit the end-stops.
5. Adjust the variable damper in the seat to pre-
vent impact on the end-stops.
General Machine Maintenance
1. Ensure that the bin float function is working
correctly.
2. Maintain bin pads and inspect bin pad
clearance.
3. Maintain brake and steering systems according
to BELL specifications.
Further Comfort Tips
1. Adjust the seat and adjust the controls so that
good posture can be maintained.
2. Adjust the mirrors to avoid having to twist for
good visibility.
3. Organise breaks in order to reduce long periods
of sitting.
Site and Road Conditions
1. Carrying out maintenance on surface.
2. Removing large rocks and obstacles.
3. Filling ditches and holes.
OPERATION