Rear Lights; Reverse Lights - Bell B35E 6X6 ADT Operator's Manual

OPERATION
OPERATING COMPONENTS
The headlights are operated from the lights switch
on the SSM and the steering column switch.

Rear Lights

The rear of the machine is equipped with stop/tail
lights (1) and indicator lights (2).
The stop light illuminates when the brake pedal is
depressed or when the engine retarder or
transmission retarder is activated.
The park lights operate from the lights switch on the
SSM.
The indicator light operates from the steering
column switch.

Reverse Lights

The machine is equipped with two flood lights (1) as
reverse lights.
The reverse lights illuminate and a warning buzzer
sounds when the reverse gear is selected.
Articulation Reverse Light
The articulation reverse lights (1), only lights up
when reverse gear is selected.
The articulation reverse lights will also stay ON for 2
minutes after the truck is switched off. This is
programmed into the CDU in order to brighten the
truck access route to allow the operator to exit the
truck safety.
The lights are situated behind the cab, along side
the steps on the left and right of the truck.
Front Working Lights (Optional)
The front working lights are switched ON with a
switch on the SSM.