Shock Absorber Adjustment; Horizontal Suspension; Height Adjustment - Bell B35E 6X6 ADT Operator's Manual

Air Dump Valve
Gently press button in at top once seated, before
exiting press button down.
This improves entry & exit clearance.

Shock Absorber Adjustment

By adjusting the Shock Absorber, the suspension
characteristics of the seat can be optimally adapted
to every road and every driver.
Lever (3) Up: Minimum damping force.
Lever (3) Down: Maximum damping force.
A good initial value is in the middle.

Height Adjustment

The required level of vertical adjustment can be
reached by pulling or pushing handle (4) till the
desired position is reached.
The height adjustment should ideally be done when
the operator is already seated and the machine
idling in neutral.
Lumbar Support (LS)
Press button to match the shape of the backrest
individually to the body contours.
Back Rest Adjustment
The back rest is spring loaded and will
automatically tilt forward when the locking
mechanism is released.
OPERATING COMPONENTS
Pull Handle (6) upwards to disengage the locking
mechanism while adjusting the back rest forwards
or backwards to obtain the correct angle.
Release the handle (6) to lock in position.

Horizontal Suspension

Move lever to the Right : Horizontal suspension
released.
Move lever to the Left: Horizontal suspension
Locked. It will allow the seat to float horizontally a
small amount to improve comfort.
Seat Heating
Seat heating is standard to all Euro models but
optional for standard S.A. models.
Thermostatic controlled heating for the seat
cushion and backrest.
The heating can be switched (A) on/off respectively
by the switch.
OPERATION