Motor Setup; Operating Mode - Assa Abloy Crawford MCS-R Installation Manual

MCS-R Control unit
replacing ECS 430P or older control units for
CDM5 & 6
2.4.2

Motor setup

1) Use the or
2) Press to enter the menu.
3) Use the or
1) "Motor direction"
2) "Motor controller"
3) "Limit switch type"
1) To change the motor direction to "Left" or "Right" navigate to the "Motor direction" menu item and press
menu item.
1) Use the or
2) To set the motor controller navigate to the "Motor controller" menu item and press
1) Use the or
3) To select the Limit switch type navigate to the "Limit switch type" menu item and press
1) Use the or
4) Press to return to the main menu.
5) Press once more to enter the maneuvering mode.
2.4.3

Operating mode

1) Use the or
2) Press to enter the menu.
3) Select:
1) "Automatic ↑/↓" as the 430P function.
2) "AUTOM. ↑/DEADM. ↓" as the 420 function.
3) "DEADMAN ↑/↓" as the 410 function.
4) Press to confirm and save the operating mode.
5) Press to return to the main menu.
6) Press once more to enter the manoeuvring mode.
End position adjustment has to be done manually in the CDM5/6 machinery.
MCS-R control unit
buttons to navigate to the "Motor setup" menu.
buttons to select one of the following menu items:
button to change the direction of the rotation. Press
buttons to choose "Contactor relay". Press
buttons to choose "MECH. LIMIT SWIT". Press
buttons to navigate to the "Operating mode" menu.
Installation Manual
twice to confirm.
to enter the menu item.
twice to confirm.
to enter the menu item.
twice to confirm.
to enter the
9