Service - Assa Abloy Crawford MCS-R Installation Manual

MCS-R Control unit
replacing ECS 430P or older control units for
CDM5 & 6
2.4.7

Service

1) Use the or
2) Press to enter the menu.
3) Use the or
1) "Cycles"
2) "Software version"
3) "Set time"
4) "Maintenance complete"
5) "Maintenance intervals"
6) "Clear errors"
7) "Event history"
8) "Clear event history"
9) "Factory reset"
1) To view the number of door cycles navigate to the "Cycles" menu item and press
2) To view the current software version navigate to the "Software version" menu item and press
3) To change the current date and time navigate to the "Set time" menu item and change the date and time using the
, or button.
4) To complete the maintenance, navigate to the menu "Maintenance complete" and press
menu item. Press
The service intervals are now restored to its pre-settings
5) To adjust the number of door cycles or the number of days to indicate when service is needed navigate to the
"Maintenance intervals" menu item.
1) To adjust the number of door cycles (between 11 and 999.999 cycles) go to the "Limit door cycles" menu item and
press to enter the menu item. Use the
setting is 25.000 cycles.
2) To adjust the number of days (between 11 and 999.999 days) go to the "Limit days" menu item and press
enter the menu item. Use the
3) The display will show "Maintenance interval reached" when the door is closed and one or both of the set intervals are
reached.
6) To reset the errors shown navigate to the "Clear errors" menu item and press
1) When the display shows "Clear all errors" press
MCS-R control unit
buttons to navigate to the "Service" menu.
buttons to select one of the following menu items:
again to confirm.
and
and button to adjust the number of door cycles. The default
button to adjust the number of days. The default setting is 365 days.
to confirm.
Installation Manual
to enter the menu item.
to enter the menu item.
to confirm and enter the
to enter the menu item.
,
to
12