MCS-R Control unit
replacing ECS 430P or older control units for
CDM5 & 6
2.4.6
Safety devices
This function is not used together with the "dead man down"-function.
1) Use the
or
2) Use the
or
1) "4-W Photoc. KL5"
2) "2-W Photoc. KL6"
3) "OSE 1 setup KL3"
4) "OSE 2 setup KL4"
5) "Safety 1 KL2 1-2" (Switch rail 1)
6) "Safety 2 KL2 3-4" (Switch rail 2)
7) "Release delay"
8) "Fine pitch"
3) For the CDM5/CDM6 setup go to
a) SWITCH RAIL 1 and choose "AIR WAVE SWITCH". Press
b) In addition select the option "Down full reverse" (to the upper end position). Press
4) Press
to return to the main menu.
5) Press
once more to enter the manoeuvring mode.
MCS-R control unit
buttons to navigate to the "Safety rail" menu. Press
buttons to adjust one of the following parameters.
to enter the menu.
to confirm.
Installation Manual
to confirm.
11