Status Displays - BADU OmniTronic Translation Of Original Operation Manual

Info
Info
BADU OmniTronic
Firmware V3.74
+49 9123 949 0
SPECK Pumpen
SPECK Pumpen
badu.de
Pos : 36.20.1 /Tec hnische D ok umentati on Speck Pum pen/Betriebs anl eitung/Beschr eibung/BADU Omnitr onic _ BADU Om ni Stell antrieb/Status-Anzeigen/Status-Anz eige @ 17\mod_1583243229228_370.docx @ 329375 @ 3 @ 1
3.2.1

Status displays

Current position
FIL
BW
RIN
DR
CIR
Day/time
Pump speed
Speeds can be N0, N1, N2 or N3.
This display becomes an alternating display as soon as an
additional function with temperature processing is connected. In
this case, the temperature at DC4 (pool water) and briefly also the
temperature at DC5 (Solar) are displayed.
03|2022
No functions should be overloaded. The
optional additional floor drain board (material
no. 2606402204) can be used for using relay
R_x. The connection as relay R_x is
described in the enclosed installation
instructions.
In the Info menu, details regarding the
firmware and the manufacturer can be
found.
Filter
Backwash
Rinse
Drain
Circulate
Description
EN 21