BADU OmniTronic Translation Of Original Operation Manual page 84

Description
Filter settings
Settings
Filter
Status
Filter
Filter: -?
Duration
Filter
Duration: 8h?
Speed
Filter
Speed: N3?
Settings relay z1-z2 and z7-z8
Settings
Relay z1-z2
Settings
Relay z7-z8
Settings relay 11-14
Settings
Relay 11-14
18 EN
Under Filter settings, the parameter for the
filter cycle are defined. Status, duration and
pump speed can be set. The status is either
"On" (√) or "Off". The filter duration is set in
hours with a maximum of 24 hours. The
speed is specified in levels with 3 various
levels to choose from (n1 – n3).
One of the following controls/messages can
be set in the Settings relay z1-z2 and relay
z7-z8 menu:
• Off: without function
• Z: Release (Individual selection for
individual positions)
Ξ: Heating control
•
• '': Cooling
• ☼: Solar control
• E: Error message
• T: Timer
The appropriate parameters and limits must
be entered accordingly.
Factory setting:
Z1-z2: Release
Z7-z8: Off
The parameters (delay time, safety time) of
the level control can be changed for the
output contact in the Settings relay 11-14
menu.
03|2022