10.2 Version Overview - BADU OmniTronic Translation Of Original Operation Manual

Technical data

10.2 Version overview

Firmware
4.01 (2022)
3.77
3.66
3.56
Hardware
4.01
3.70
2.XX
1.XX
58 EN
• Frost protection now under "General
functions"
• "Overwintering" mode
• Quick display
• In the Service display of sensor and time
errors
• Different functions for two conductive
sensors
• Frost protection including 3 temperatures
and 3 speed stages possible
• DRP with automatic reset after different
times
• Heating active possible per time interval or
also parallel to the filter time
• A speed stage is selectable for frost
protection
• A speed stage is selectable for manual
operating modes
• New menu item for z1-z2 and z7-z8: OFF
• Conductive sensors included on the board
• Other multifunction relay z7-z8
• Changeover from micro-switch to magnetic
sensor
• Board with micro-switches
03|2022