3.11 Optional Accessories; Relay Up To 1.5 Kw, 1; 3.11.2 Sub-Assembly For Three-Phase Pumps; 3.11.3 Adapter Output 3 Speed Stages - BADU OmniTronic Translation Of Original Operation Manual

Description

3.11 Optional accessories

Since 2021, the BADU OmniTronic box has more space in which
various additional sub-assemblies can be installed by the
customer or as follows by the manufacturer.
Sub-assemblies for 1~ pumps with higher current values, 3~
pumps with contactor/circuit breaker combination in different
current strengths, a board floor drain or the BADU App
OmniTronic can be installed among others. Other sub-assemblies
for the existing 15 mm DIN rail can be installed by the customer.

3.11.1 Relay up to 1.5 kW, 1~

Sub-assemblies for AC pumps with contactor: 2606402205
An auxiliary relay is provided for pumps with a current
consumption greater than 4 A. This can be inserted into the
BADU OmniTronic box.
The maximum current consumption for AC pumps is 6.4 A. This
corresponds to AC pumps up to BADU Prime 20. Since a higher
power flows through this relay, a connecting cable with plugs with
1.5mm² each is delivered as a general supply.
Pos : 36.72 /Tec hnische D ok umentati on Speck Pum pen/Betriebs anl eitung/Beschr eibung/BADU Omnitr onic _ BADU Om ni Stellantrieb/Baugruppe für Dr ehs trom pum pen @ 21\mod_1610431475435_370.docx @ 396857 @ 3 @ 1

3.11.2 Sub-assembly for three-phase pumps

These sub-assemblies are delivered with a contactor and a motor
circuit breaker with a fixed current strength setting. This is
incorporated into the enlarged box of the BADU OmniTronic.
2606402206 - 1.0A
2606402207 - 1.3A
2606402208 - 1.6A
2606402209 - 2.0A
2606402210 - 2.3A
2606402211 - 3.0A
This corresponds, for example, to the following pumps:
BADU Prime 7 to BADU Prime 25, respectively 3-phase current.

3.11.3 Adapter output 3 speed stages

(Article no. 2606402108)
An adapter can be used for speed-controlled pumps of other
manufacturers. The relay output contacts are provided for this.
The adapter board is inserted into the BADU OmniTronic housing.

3.11.4 Floor drain daughterboard

(Article no. 2606402204)
The water header is often not sufficient for the backwash for pools
with an overflow gutter. In this case, a floor drain can be opened,
e.g. by a motorised ball valve, with a daughterboard.
36 EN 03|2022