Respekta KM 4295I-28 Installation & User's Instructions page 88

5.3.2 Installation instructions
Important:
The distance between the base of the hob and the upper part of any cabinet or appliance below it (3)
must be at least 50 mm.
WARNING: If the hob is installed on top of an oven, make sure that the oven has
ventilation.
1 1 2 2
4 4
1) - Worktop
2) - Sealing tape
3) - Minimum distance
4) - Brackets
5) - Induction hob
6) - Screws
Installation steps
1) - Remove the protective film from the pre-mounted sealing tape (2).
2) - Bring the hob (5) into the worktop cutout and press gently.
3) - Secure the four mounting brackets (4) to the hob base (5) with the screws (6).
CAUTION: Do not put pressure on the hob to avoid damaging it.
5 5
6 6
3 3
Fig. 5.2
en-39