Respekta KM 4295I-28 Installation & User's Instructions page 74

2 - Place the dish on the desired hob.
WARNING: The base of the dish and the
hob must be clean and dry.
3 - By pressing the hotplate selection button (1 or
2), an indicator next to it will flash.
4 - Press the cooking level buttons "+/-" (3) to set
the desired cooking level. The cooking power/
intensity level indicated on the display ranges
from 1 to 9 (0 means the hotplate is off). The
higher the value, the greater the cooking
intensity.
NOTE: If you have not selected a
cooking level, the appliance switches off
automatically after one minute. You will
have to restart from step 1.
The cooking intensity level can be
changed at any time during cooking.
The flashing of the symbol
means:
a) - There is no dish on the hotplate for which you are selecting a cooking level.
b) - The dish you are using is not suitable for induction hobs, it may be too small in diameter, or it is
not centred correctly on the hotplate. The symbol switches off automatically after 1 minute if no
suitable dish is placed on the corresponding hotplate.
1/2 1/2
3 3
Fig. 4.10
Fig. 4.11
Fig. 4.12
en-25