Respekta KM 4295I-28 Installation & User's Instructions page 83

If the timer is set for several hotplates:
1 - When setting the timer for several hotplates, the red dots for the relevant hotplates light up. The
display shows the timer that expires first. The dot of the corresponding hotplate flashes.
2 - Once the countdown timer has elapsed, the corresponding hotplate switches off. Then the
display will show the next expiring timer and the dot for the corresponding plate will flash.
NOTE: By pressing the hotplate selection button, the timer corresponding to the plate
selected will be shown in the timer display.
en-34
(set to 15 minutes)
(set to 25 minutes)
Fig. 4.35
Fig. 4.36