Avery Dennison 9444 User Manual page 25

IP Address Configuration
IP Address Assignment
IP Address
Subnet mask
Gateway
Port Number
System Configuration
System Name
User ID
User Password
Inactivity Time
Wireless Frequency
Classification: Avery Dennison – Public
Assign the IP address manually or automatically through
DHCP. If the network does not support DHCP, you have to
assign IP address manually.
This information is required for LAN/WLAN communication
and unique IP address must be entered. The
communication port is set to 9100 by default. You have to
change the port number via reference below table to use
another port.
Port Number
9100, 6101,
9300
80
3337, 9000
Management
This string indicates the WLAN printer. A maximum of 64
characters can be entered.
※ This string may not be shown in certain printers.
User ID and Password are used to access a printer from a web
browser. A maximum of 32 characters can be entered.
If there is no communication between the host and printer
during the set period of time, the connection will be closed
automatically. The value can be set between 0 and 3600
seconds (1 hour) by a unit of second. If set to 0, this function
is disabled.
2.4GHz
5.0GHz
2.4GHz/5.0GHz
(Priority: 2.4GHz)
2.4GHz/5.0GHz
(Priority: 5.0GHz)
※ You may not be able to choose frequency in certain
printers.
21
Description
Description TCP/UDP
Printing TCP
HTTP TCP
Device
UDP
Description
2.4GHz is used for frequency.
5.0GHz is used for frequency.
Both 2.4GHz/5.0GHz are used.
(2.4GHz has a higher priority.)
Both 2.4GHz/5.0GHz are used.
(5.0GHz has a higher priority.)
Notes
Used for printing
Web page
Bixolon Device
Discovery/Setting