Table of Contents
Advertisement
The following settings can be configured using the Net Configuration Tool. For WLAN, there are other settings
beyond those listed below. Available WLAN settings may vary depending on the functions supported by the
printer's WLAN module.
Settings
IP Address
Assignment
Method
IP Address
Subnet Mask
Gateway
Port Number
Inactivity Time
System Name
Classification: Avery Dennison – Public
Assign IP address manually or automatically through DHCP. If the
network does not support DHCP, you must assign the IP address
manually.
This information is required for LAN/WLAN communication and a
unique IP address must be entered. The communication port is set to
9100 by default. You have to change the port number via reference
below table to use another port.
Port Number
9100, 6101, 9300
80
3337, 9000
If there is no communication between the host and printer during the
set period of time, the connection will be closed automatically. The
value can be set between 0 and 3600 seconds (1 hour). If set to 0, this
function is disabled.
A string that indicates the WLAN printer. A maximum of 64 characters
can be entered.
※ This string does not display on certain printers.
Description
Description
TCP/UDP
Printing
TCP
HTTP
TCP
Device
UDP
Management
14
Notes
Used for printing
Web page
Bixolon Device
Discovery/Setting
Advertisement
Table of Contents
