Panel Or Wall Mounting The Chassis - Emerson FB3000 Instruction Manual

Figure 2-10. Single 4-Slot Chassis only can be Mounted Horizontally or Vertically
2.6.1

Panel or Wall Mounting the Chassis

To mount the RTU directly to a wall without using the DIN rail, you must first remove the mounting
plate. This exposes four holes into which you can insert screws to mount the RTU to a panel or wall.
You also need to remove I/O and personality modules to show the holes on the other side.
1. Remove I/O logic modules to expose the upper holes.
2. Remove personality modules to expose the lower holes.
3. Use a #2 Phillips-head screwdriver to remove the four screws that secure the mounting plate.
Installation
Emerson FB3000 RTU Instruction Manual
D301851X012
October 2022
17