Emerson FB3000 Instruction Manual page 6

FB3000 - CSA Approval Information
CD9411M
Issued: June 23, 2022
ANSI/UL 121201
CAN/CSA —C22.2 No. 60079-7
ANSI/UL 60079-7
CAN/CSA 22.2 No. 60079-0
ANSI/UL 60079-0
CAN/CSA 22.2 No. 61010-1
CAN/CSA 22.2 No. 61010-2-201
ANSI/UL 61010-1
ANSI/UL 61010-2-201
WARNING
EXPLOSION HAZARD — CONNECT OR DISCONNECT ONLY IN A NON-HAZARDOUS AREA.
WARNING
EXPLOSION HAZARD — DO NOT REMOVE OR REPLACE WHILE CIRCUIT IS LIVE UNLESS THE AREA IS
FREE OF IGNITABLE CONCENTRATIONS.
WARNING
EXPLOSION HAZARD — DO NOT REMOVE OR REPLACE FUSE WHEN ENERGIZED.
DANGER
EXPLOSION HAZARD: BATTERIES MUST ONLY BE CHANGED IN AN AREA FREE OF IGNITABLE
CONCENTRATIONS
WARNING
DO NOT USE THE USB CONNECTOR UNLESS THE AREA IS KNOWN TO BE NON-HAZARDOUS.
CSA-4
Non-incendive Electrical Equipment for Use in Class I and II
Division 2 and Class III Division 1 and 2 Hazardous Locations.
Explosive atmospheres — Part 7: Equipment protection by
increased safety "e"
Explosive atmospheres — Part 7: Equipment protection by
increased safety "e"
Explosive atmospheres — Part 0: Equipment — General
Requirements
Explosive atmospheres — Part 0: Equipment — General
Requirements
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use, Part 1: General
Requirements
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use - Part 2-201:
Particular requirements for control equipment
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use - Part 1: General
Requirements
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use - Part 2-201:
Particular requirements for control equipment