Related Manuals for Emerson Wireless Field Link
Summary of Contents for Emerson Wireless Field Link
- Page 1 Quick Start Guide 00825-0100-4421, Rev DB February 2019 ™ Emerson Wireless Field Link...
-
Page 2: Table Of Contents
February 2019 Quick Start Guide NOTICE This guide provides basic guidelines for the Emerson Wireless Field Link. It does not provide instructions for diagnostics, maintenance, service, or troubleshooting. This guide is also available electronically on www.Emerson.com. Failure to follow these installation guidelines could result in death or serious injury. -
Page 3: Wireless Considerations
Wireless considerations Power up sequence The Emerson Wireless Field Link and wireless I/O should be installed and functioning properly before the power modules are installed in any wireless field devices. Wireless field devices should also be powered up in order of proximity from the Field Link beginning with the closest. - Page 4 February 2019 Quick Start Guide Antenna position The antenna should be positioned vertically, either straight up or straight down, and should be approximately 3 ft. (1 m) from any large structure, building, or conductive surface to allow for clear communication to other devices. Figure 2.
-
Page 5: Physical Installation
Quick Start Guide February 2019 Intended use The Field Link must be used in conjunction with a network manager or network Gateway. The Field Link then functions as a translator between the wired network and a wireless field network. Figure 4. Example System Architecture A. -
Page 6: Verify Operation
3. Connect the Data + lead to the “A (+)” terminal and the Data – lead to the “B (–)” terminal. 4. Plug and seal any unused conduit connections. 5. Replace the housing cover. Figure 6. Emerson Wireless Field Link Terminal Diagram A. Data A (+) C. +10.5 to 30 VDC –... -
Page 7: Reference Information
Figure 7. Emerson Wireless Field Link Terminal Diagram A. Data A (+) C. +10.5 to 30 VDC – B. Data B ( D. Return Note The Emerson Wireless Field Link requires separate twisted shield pairs (four wires) for power and data. - Page 8 February 2019 Quick Start Guide Figure 8. Emerson Wireless Field Link Dimensional Drawing 90° 12.43 (316) 10.91 5.21 (277) 3.55 (132) 3.55 (90.17) 4.20 (90.17) (107) 5.51 5.51 (140) (140) A. 2x Conduit plug C. Extended range antenna ® B. Possible antenna rotation shown D.
-
Page 9: Ordering Information
Quick Start Guide February 2019 Ordering information Table 2. Emerson Wireless Field Link ★ The Standard offering represents the most common options. The starred options ( ) should be selected for best delivery. The expanded offering is subject to additional delivery lead time. - Page 10 February 2019 Quick Start Guide Options (Include with selected model number) Meter ★ LCD display Gland and connector options – Cable gland (7,5 11,9 mm) – Thin wire cable gland (3 8 mm) Typical model number: 781 A1 D 1 KL WA3 WK3 M5...
-
Page 11: Product Certifications
A copy of the EU Declaration of Conformity can be found at the end of the Quick Start Guide. The most recent revision of the EU Declaration of Conformity can be found at Emerson.com. Ordinary Location Certification As standard, the transmitter has been examined and tested to determine that... - Page 12 February 2019 Quick Start Guide Canada I6 Canada Intrinsically Safe Certificate: CSA 2330424 Standards: CSA C22.2 No. 0-M91, CSA C22.2 No.94-M91, CSA Std. C22.2 No. 142-M1987, CSA-C22.2 No. 157-92, CSA Std. C22.2 No. 60529 – 2005 +60 °C) Markings: Intrinsically Safe Class I, Division 1, Groups A, B, C, and D T3C (T Type 4X;...
- Page 13 Quick Start Guide February 2019 Special Conditions for Safe Use (X): 1. The plastic antenna may present a potential electrostatic ignition hazard and must not be rubbed or cleaned with a dry cloth. 2. The Rosemount 781 enclosure is made of aluminum alloy and given a protective paint finish;...
- Page 14 February 2019 Quick Start Guide Combinations KD Combination of I1, I5, and I6 KL Combination of I1, I5, I6, and I7...
- Page 15 No: RMD 1083 Rev. H Rosemount, Inc. 8200 Market Boulevard Chanhassen, MN 55317-9685 declare under our sole responsibility that the product, Rosemount 781 Wireless Field Link manufactured by, Rosemount, Inc. 8200 Market Boulevard Chanhassen, MN 55317-9685 to which this declaration relates, is in conformity with the provisions of the European Union Directives, including the latest amendments, as shown in the attached schedule.
- Page 16 February 2019 Quick Start Guide EU Declaration of Conformity No: RMD 1083 Rev. H EMC Directive (2014/30/EU) Harmonized Standards: EN 61326-1:2013 Radio Equipment Directive (RED) (2014/53/EU) Harmonized Standards: EN 300 328: V2.1.1 EN 301 489-17: V3.2.0 EN 60950-1: 2006+A11+A12+A1+A2 EN 50371:2002 ATEX Directive (2014/34/EU) Baseefa11ATEX0059X –...
- Page 17 Quick Start Guide February 2019 EU Declaration of Conformity No: RMD 1083 Rev. H ATEX Notified Body SGS FIMKO OY [Notified Body Number: 0598] P.O. Box 30 (Särkiniementie 3) 00211 HELSINKI Finland ATEX Notified Body for Quality Assurance SGS FIMKO OY [Notified Body Number: 0598] P.O.
- Page 18 February 2019 Quick Start Guide Rosemount 781 China RoHS List of Rosemount 781 Parts with China RoHS Concentration above MCVs / Hazardous Substances Hexavalent Polybrominated Polybrominated Part Name Lead Mercury Cadmium Chromium biphenyls diphenyl ethers (Pb) (Hg) (Cd) (Cr +6) (PBB) (PBDE) Electronics...
- Page 19 Quick Start Guide February 2019...
- Page 20 Dubai, United Arab Emirates Electric Co. +971 4 8118100 Rosemount is a mark of one of the Emerson family of companies. All other marks are the property of their respective owners. +971 4 8865465 © 2019 Emerson. All rights reserved.