Appendix A - Factory Settings
Appendix A - Factory Settings
NOTE: The User Configuration Tool and factory settings
are not to be used or accessed unless directed to by
Graco personnel.
The 26C266 Hazardous Location Wireless Remote has
been pre-configured for proper functionality between the
nodes and the ProDispense. Additional changes to dip
switches and other settings should only be done after
consulting a Graco technical support representative.
Additional cables and software may be required, and
are available from Graco upon request.
30
User Configuration Tool
The User Configuration Tool (UCT) allows users to link
I/O points in the wireless network, view I/O register
values, and set system communication parameters
when a host system is not part of the wireless network.
The software runs on any computer with a Windows
Vista, Windows 7, Windows 8, or Windows 10 operating
system.
3A6715B