26C266 Wireless Remote Approvals - Graco 26C266 Manual

26C266 Wireless Remote

26C266 Wireless Remote Approvals

Part No.
17V930 Transceiver node only.
Battery-operated, with entity
parameter-approved
input/output interface, with
indicator lights and switches.
See 26C266 Wireless Control
Drawing, on page 14, for entity
parameter details.
17V932 User interface assembly, with
IS-approved LEDs and simple
apparatus-assessed switches.
10
Description
Approvals
Special Conditions for Safe Use Imposed by Intrinsic Safety Certificate LCIE 08
ATEX 6098 X: Ambient temperature range is -40 to 70 °C. Sure Cross
FlexPower devices can only be connected to Intrinsically Safe certified equipment or
simple apparatus as defined by EN 60079-11. All connected equipment must comply
with the Entity Parameters (Safety Parameters) listed in the Control Drawings (p/n
141513). The device must only use a lithium battery manufactured by XENO, type
XL-205F.
Approvals
Approvals through Banner Engineering
1725
CSA - C/US
Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G;
Class III, Division 1 (Ex ia IIC T4; AEx ia IIC T4)
Certificate: 2008243
ATEX
Zone 0 (Category 1G) and 20 (Category 1D), Temperature Class T4 (II 1 GD;
Ex ia IIC T4 Ga; Ex ia IIIC T82°C Da IP68)
Certificate: LCI 08 ATEX 6098 X
1725
IEC IECx SIR 13.0020X
ATEX Sira 13ATEX2058X
CSA CoC 2679646
CSA-C/US
Gas and Vapors: Class I Zone 0 AEx/Ex ia IIC T4 Ga; Class I Div 1
Groups A, B, C, D
ATEX/IECEx
Gas and Vapors: II 1 G Ex ia IIC T4 Ga (Group IIC Zone 0)
®
DX99
3A6715B