Table of Contents
Advertisement
Barrier Enclosure
Barrier Enclosure
Barrier Enclosure Assemblies
Assembly
111985 -
Dual-channel Stahl
Barrier
25E765 -
17C888 -
Meter Barrier
50 ft Meter Cable
Enclosure
19A758 -
Assembly
Barrier Enclosure
111985 -
Dual-channel Stahl
Barrier
514895 -
Single-channel Stahl
25B223 -
Barrier
Solenoid and
19A982 -
Meter Barrier
IS-approved MAC 411
Enclosure
Series 2/5 Solenoid
Assembly, with
Valve
Solenoid
Solenoid Barrier Cables
19A758 -
Barrier Enclosure
NOTE: The barriers and MAC valve have matching entity parameters.
4
Component
Provides power and signal interface to the Graco G3000 meter sensor.
Pre-wired to the barrier, using individually-shielded twisted-pair cables
selected to be used in hazardous locations.
Metal enclosure with hinged cover, for barrier mounting and protection.
The barrier is DIN-rail mounted in the enclosure, and cable connections
are separated by entering the enclosure on opposite ends of the barrier.
The cables are secured to maintain separation by strain relief cable
grommets and adhesive wire-conductor anchoring pads.
Same as for 25E765, Meter Barrier Enclosure Assembly.
Additional single-channel barrier for a solenoid valve circuit.
Assembly includes pneumatic inlet and outlet fittings, and sintered
exhaust silencers.
Shielded single-twisted-pair cables, secured to maintain separation by
strain relief cable grommets and adhesive wire-conductor anchoring
pads. The solenoid cables are spliced with Wago lever-lock connectors.
Same as for 25E765, Meter Barrier Enclosure Assembly.
Description
3A6715B
Advertisement
Table of Contents
