Cleaning Program Sequence For Twin Applications; Program Sequence With Parting Agent Atomizer - Overview; Cleaning The Gas Nozzle Tip And Nozzle Fitting - Detailed Description; Injecting Parting Agent - Detailed Description - Fronius Robacta TC 2000 ext. Operating Instructions Manual

Cleaning Program Sequence for Twin Applica-
tions
Program Se-
1.
quence with 2.
Parting Agent
3.
Atomizer –
4.
Overview
Cleaning the gas
NOTE!
nozzle tip and
During the cleaning process, blow out the welding torch with compressed air via
nozzle fitting –
detailed descrip- the hosepack. Contamination and surplus parting agent will be removed.
tion
Injecting parting The even application of a parting agent has the following advantages:
agent – detailed -
description
-
NOTE!
Make sure that the gas nozzle does not touch the housing parts of the cleaning
aperture at any time.
48
Welding
Clean the gas nozzle tip and nozzle fitting
Inject parting agent
Welding
Reduced adhesion of welding spatter
New contamination is prevented
NOTE!
Make sure that the gas nozzle does not
touch the housing parts of the clean-
ing aperture at any time.
Position the welding torch approx.
1
50 mm (1.97 in.) above the clean-
ing aperture and centrically with
respect to the middle of the clean-
ing aperture
Move the welding torch vertically
2
to the cleaning/injection position
- See graphic
Trigger the cleaning process and
3
wait for approximately 1 second