LGM Series
Operation
7
Operation
7.1
Operating the Light Grid Using the Programming Interface
The Receiver Strip Can Be Manually Configured and Parameterized Using the
Programming Interface
Standard operation in accordance with configuration and parameterized values
■
Functions of first parameterization level
■
Functions of second parameterization level
■
Displays and Operating Elements
1
2
4
5
6
7
Figure 7.1
Number
1
2
3
4
12
The other indicators have no function in standard operation
Table 7.1
When you select a function, the current status of this function is displayed within parameteriza-
tion mode. The indicator flashes at approx. 1 Hz according to the following pattern:
Display mode
Active
Inactive
3
Q
8
H1
9
10
H2
H3 F 2
11
12
Function indicators on the receiver strip
Symbol
Function
Menu key
Operating indica-
tor
Status indicator
Q display
Q
OK key
Display and function in standard operation
Description
Press the Menu key once to switch the device
to parameterization mode.
Indicator for operating state and power save
mode
Indicator for detection field status, operating
reserve status, and fault status
Display for object identification status and, in
general, for detection field status
Press OK once to display the parameterization
status. (First-level functions)
Display pattern
Long on, short off
Long off, short on
21