Supermicro SuperServer SYS-E302-12A-4C User Manual page 30

Chapter 3 Maintenance and Component Installation
Figure 3-6. Installing a 7mm 2.5" Hard Drives
5. Optionally, for a 7mm 2.5" drive, slide it inside the tray first, then secure it to the drive tray
with the standoff plugs as shown above.
6. Connect the drive data and power cables.
7. Secure the tray to the chassis by pushing the tray down into the slots.
8. Attach the cables to the appropriate motherboard connector(s).
9. Reinstall the chassis cover and power up the system.
30