Supermicro SuperServer SYS-E302-12A-4C User Manual page 29

Installing the Hard Drive
The motherboard should be installed before installing the drive(s).
1. Make sure there is no power to the system as described in section 3.1 and remove the
chassis cover.
2. See section 3.2 for instructions on how to remove the top cover.
3. Lift the hard drive tray from the chassis as shown in Figure 3-4.
Figure 3-5. Installing a 15mm 2.5" Hard Drive
4. Place one 15mm 2.5" drive directly into the tray and secure it to the tray with the standoff
plugs on the sides of the tray.
Chapter 3 Maintenance and Component Installation
29