SMA STP 50-40 Operating Manual page 59

SMA Solar Technology AG
• Adoption of configuration from a file
• Configuration with the installation assistant (recommended)
• Manual configuration
Accepting the settings
Saving the made settings is indicated by an hourglass symbol on the user interface. If the DC
voltage is sufficient, the data is transferred directly to the inverter and accepted. If the DC
voltage is too low (e. g. in the evening), the settings are saved, but they cannot be directly
transferred to or accepted by the inverter. As long as the inverter has not yet received and
accepted the settings, the hourglass symbol will continue to be displayed on the user interface.
The settings will be accepted when there is sufficient DC voltage applied and the inverter
restarts. As soon as the hourglass symbol appears on the user interface, the settings have been
saved. The settings will not be lost. You can log off of the user interface and leave the system.
Adopting the Configuration from a File
You can adopt the inverter configuration from a file. To do this, there must be an inverter
configuration saved to a file.
Procedure:
1. Select the configuration option Adopting configuration from a file.
2. Select [Browse...] and select the desired file.
3. Select [Import file].
Configuring the Installation Assistant (Recommended)
1. Select the configuration option Configuration with Installation Assistant.
☑ The installation assistant will open.
2. Follow the installation assistant steps and make the settings appropriate for your system.
3. For every setting made in a step, select [Save and next].
☑ In the last step, all made settings are listed in a summary.
4. To correct settings you made, select [Back], navigate to the desired step, correct settings and
select [Save and continue].
5. Once all settings are correct, select [Next] in the summary.
6. To save the settings to a file, select [Export a summary] and save the file on your smart
device.
7. To export all parameters and their settings, select [Export all parameters]. This exports all
parameters and their settings into an HTML file.
☑ The start page of the user interface opens.
Manual configuration
You can configure the inverter manually by setting the desired parameters.
Operating manual
7 Commissioning
STP50-4x-BE-en-23 59