SMA STP 50-40 Operating Manual page 63

SMA Solar Technology AG
3. Scan the QR Code on you product via the SMA 360° App.
☑ The smart device automatically connects to the product. The web browser of your smart
device opens and the login page of the user interface is displayed.
4. If the web browser of the smart end device does not open automatically and the login page of
the user interface is not displayed, open the web browser and enter https://smalogin.net in
the address bar.
Connection with WPS
Requirement:
☐ The smart device must have a WPS function.
Procedure:
1. Enable the WPS function on the inverter. To do this, tap twice in succession on the enclosure
lid of the DC-Connection Unit next to the LEDs.
☑ The blue LED flashes quickly for approx. two minutes. The WPS function is active during
this time.
2. Enable the WPS function on your smart device.
3. Open the web browser of your smart end device and enter https://smalogin.net in the
address bar.
Connection with Wi-Fi network search
1. Search for Wi-Fi networks with your smart device.
2. Select the SSID of the product SMA[serial number] in the list with the detected Wi-Fi
networks.
3. Enter the device-specific Wi-Fi password (see WPA2-PSK on the type label of the product or
the rear side of the manual included in delivery).
4. Open the web browser of your smart end device and enter https://smalogin.net in the
address bar.
☑ The login page of the user interface is displayed.
5. If the login page of the user interface does not open, enter the IP address 192.168.12.3 or, if
your smart end device supports mDNS services, SMA[serial number].local or https://
SMA[serial number] in the address bar of the web browser.
Operating manual
8 Operation
STP50-4x-BE-en-23 63