SMA STP 50-40 Operating Manual page 62

8 Operation
The following connection options ar available:
• Connection to SMA 360° App
• Connection with WPS
• Connection with Wi-Fi network search
Requirements:
☐ The product must be commissioned.
☐ A smart device (e.g. smartphone, tablet or laptop) must be available.
☐ The respective latest version of one of the following web browsers must be installed on the
smart device: Chrome, Edge, Firefox or Safari.
☐ JavaScript must be enabled in the web browser of the smart device.
☐ The installer's SMA Grid Guard code must be available to change network-relevant settings
after the first 10 hours of feed-in operation, or after completing the installation assistant. You
can request the SMA Grid Guard code via the Online Service Center.
SSID, IP address and WLAN password
• SSID in WLAN: SMA[serial number] (e.g. SMA0123456789)
• Device-specific WLAN password: see WPA2-PSK on the type label of the product or the
rear side of the manual included in delivery
• Standard access address for a direct connection via WLAN outside of a local network:
https://smalogin.net or 192.168.12.3
Importing and exporting files with smart devices having an iOS operating
system is not possible
For technical reasons, importing and exporting files (e.g., importing an inverter configuration,
saving the current inverter configuration or exporting events and parameters) is not possible
with smart devices having an iOS operating system.
• Use a smart device that does not have an iOS operating system for importing and
exporting files.
Connection to SMA 360° App
Requirements:
☐ A smart device with camera (e.g. smartphone or tablet) must be available.
☐ The SMA 360° App must be installed on the smart device.
☐ An user account for Sunny Portal must already exist.
Procedure:
1. Open the SMA 360° App and login with the Sunny Portal account details.
2. Select QR-Code Scan in the menu.
62 STP50-4x-BE-en-23
SMA Solar Technology AG
Operating manual