Telephone Features In Normal And Local Mode; Normal Mode; Local Mode - Nortel SRG50 Configuration Manual

Appendix A

Telephone features in normal and local mode

The information provided here is designed for distribution to telephone users at the SRG50.

Normal mode

In normal mode, IP telephones have the feature set that is supported by the main office. User cards
are not supplied with the SRG50 because the feature set depends on the main office applications. If
required, obtain user cards from the main office for normal mode features.
Features available to analog and ISDN telephones are provided by the SRG50 and depend on the
SRG50 applications. Consult the SRG50 system administrator for a complete description.
A quick reference list to the default SRG50 features for an analog telephone are provided in
extension features" on page
have been changed.

Local mode

In local mode, call control and features are provided by the SRG50 are processed by the SRG50.
Access to the main office is over PSTN lines; main office telephony features and applications are
not available.
If routing and destination codes are set up as suggested in
the dialing sequence for the main office is the same as in normal mode.
For illustrations that show the default display settings for each type of IP telephone when the
phone is in local mode, refer to:
• "2050 Software Phone in Local Mode*" on page 102
• "2004 in Local mode" on page 103
• "2002 in Local mode" on page 104
104. Consult the SRG50 administrator to determine if these features
Survivable Remote Gateway 50 Configuration Guide
"Call routing: introduction" on page
101
"ATA
86,