66
Chapter 5 Setting up IP telephones
Figure 10 Modules panel, IP & Application Sets
Configuring telephone (DN) records
DN records for IP telephones are configured through the All DNs panel (Configuration >
Telephony > Sets > All DNs
BCM50 Device Configuration Guide provide basic instructions for configuring DNs and IP
telephones. The following instructions are in addition to these instructions and only apply to IP
telephones that are to be redirected to a main office call server.
N0060720
N0060720
(Figure
11). The BCM50 Networking Configuration Guide and the
Note: It is assumed that the line pools have been assigned. In the default
configuration, VoIP trunks are assigned to line pool BlocA and the four
PSTN trunks are assigned to line pool A. Refer to
on page
10,
"SRG50 terminology" on page
configuration" on page 27
15, and
for more information.
"Creating the SRG50"
"Foundation