Configuring The Voip Gateway Using The Ini File; Retrieving The Ini File From The Voip Gateway - Nortel VoIP Gateway Software Manual

performing a reset. Similarly, the Note that follows step 7 should be ignored.
When a reset is performed, all new values are stored in non-volatile memory and
are not restored after a power cycle.

Configuring the VoIP Gateway using the INI file

Retrieving the INI file from the VoIP Gateway

p85 The INI file that is retrieved from the gateway will only include parameters that
have been changed from the default settings.
Contents of the INI File – H.323 Parameters
Table 16 describes various INI file parameters for setting H.323 elements. The
description of the following parameters should be changed as shown below:
Norstar VoIP Gateway Configuration Guide Addendum – Version 2.1 6