The Ini File Example; Figure 22 Voip Gateway Ini File Example - Nortel VoIP Gateway Configuration Manual

106 Contents of the INI file
Note: Using the Windows Properties display, verify that the MS-DOS name of the INI file
is in fact mp104.ini, and NOT by mistake mp104.ini.ini, or mp104~.ini.
To restore the VoIP Gateway default configuration parameters, use the mp1xx.INI file
without any valid parameters or with semicolon (;) character preceding all lines in the file.

The INI file example

Figure 22 shows an example of an INI file for a VoIP Gateway.

Figure 22 VoIP Gateway INI file example

MGControlProtocolType = 4
[Channel Params]
DJBufferMinDelay = 75
RTPRedundancyDepth = 1
IsGatekeeperUsed = 1
GatekeeperIp = 192.168.122.179
DefaultNumber = 101
MaxDigits = 3
CoderName = g7231
IsFastConnectUsed = 1
; Phone of each end point
Channel2Phone = 0, 101
Channel2Phone = 1, 102
Channel2Phone = 2, 103
Channel2Phone = 3, 104
EnableSyslog = 0
LoggerFormat = 1
[Files]
CallProgressTonesFilename = 'CPUSA.dat'
BurnCallProgressTonesFile = 1
FXSCOEFFILENAME = 'coeff.dat'
BurnCoefFile = 1
P0606298 02