Configure The Can Objects; Select The Can Object - National Instruments NI-CAN User Manual

Configure the CAN Objects

© National Instruments Corporation
right-click the mouse on the control, and then select What's This? from the
pop-up menu that appears.
Selecting the Configure CAN Objects button opens a dialog box you can
use to configure the CAN Objects for the selected port. Figure 5-2 shows
the CAN Object Configuration dialog box for Windows 98/95. The
Windows NT dialog box is similar.
Figure 5-2. CAN Object Configuration Dialog Box
If you need help on a particular control in this dialog box, right-click the
mouse on the control, and then select What's This? from the pop-up menu
that appears.

Select the CAN Object

Use the CAN Object list box to select the CAN Object you want to
configure. The list box lists all existing CAN Objects. The names are the
same as those used with NI-CAN, with the arbitration ID of the CAN
Object shown in decimal format (
Chapter 5
,
STD5 XTD12004
5-5
NI-CAN Configuration Utility
, and so on). If an alias
NI-CAN User Manual