National Instruments NI-CAN User Manual page 60

Appendix A Uninstalling the Hardware and Software
Uninstalling the CAN Hardware from Windows NT
Uninstalling the NI-CAN Software
NI-CAN User Manual
Figure A-1. Selecting an Interface to Remove from Windows 98/95
After you remove the appropriate CAN interface information from the
Device Manager, you should shut down Windows, power off your
computer, and physically remove the CAN interfaces.
Because the current version of Windows NT does not maintain hardware
information for the CAN interfaces, you need only to physically remove
the CAN interfaces from your computer. Power off your computer and
physically remove the CAN interfaces.
Before uninstalling the NI-CAN software, you should remove all CAN
interface hardware from your computer.
Complete the following steps to remove the NI-CAN software.
A-2 ni.com