Complete the Configuration
© National Instruments Corporation
Exit the CAN Object Setting Dialog Box
When you are finished configuring the CAN Objects, click on OK to close
the dialog box and save any changes you have made, or click Cancel to
close the dialog box without saving any changes you have made.
After selecting OK or Cancel, you are returned to the Settings tab so you
can complete the configuration for the CAN interface.
When you have finished using the NI-CAN Configuration utility, click OK
to close the dialog box and saves any changes you have made, or click
Cancel to close the dialog box without saving any changes you have made.
Chapter 5
5-7
NI-CAN Configuration Utility
NI-CAN User Manual