National Instruments NI-CAN User Manual page 86

Index
S
settings dialog box (figure), 5-3
simpanlz.c source code, 4-1
SimpanlzLS.c source file, 4-2
Smart Distributed System (SDS), 1-9
SOF (Start of Frame) field, 1-3
standard for CAN, 1-1
Start of Frame (SOF) field, 1-3
state changes, detecting, 3-4
state transitions, queues, 3-1
status of function calls, checking, 2-10
C and C++, 2-12
LabVIEW, 2-11
NI-CAN status format, 2-10
code, 2-10
error/warning indicators
(severity), 2-10
qualifier, 2-11
stuff error, 1-6
system integration, by National
Instruments, D-1
System Properties dialog box, using to remove
interfaces from Windows 98/95, A-2
T
technical support resources, D-1
troubleshooting and common questions
Windows 98/95, B-1
CAN hardware problem
encountered, B-4
common questions, B-5
interrupt resource conflict, B-4
memory resource conflict, B-3
missing CAN interface, B-2
NI-CAN Diagnostic utility
failures, B-3
NI-CAN software problem
encountered, B-4
problem shown in Device
Manager, B-2
NI-CAN User Manual
Windows 98/95 Device
Manager, B-1
Windows NT, C-1
CAN hardware problem
encountered, C-2
common questions, C-3
interrupt resource conflict, C-2
memory resource conflict, C-1
missing CAN interface, C-2
missing CAN interface in NI-CAN
Configuration utility, C-1
NI-CAN Diagnostic utility
failures, C-1
NI-CAN software problem
encountered, C-2
no resources assigned, C-1
U
uninstalling
CAN hardware
Windows 98/95, A-1
Windows NT, A-2
NI-CAN software
some components left
installed, B-6, C-4
Windows 98/95 or Windows NT, A-2
using this manual set, xi
utilities. See NI-CAN Configuration utility;
NI-CAN Diagnostic utility.
W
waiting for available data, 2-9
Web support from National Instruments, D-1
Windows 98/95
NI-CAN driver and utilities, 1-12
starting NI-CAN Configuration
utility, 5-1
troubleshooting and common
questions, B-1
I-6 ni.com