Table of Contents
Advertisement
•
Trigger Time – waiting time before Active Alarm/Warning is generated;
•
Release Time – waiting time before Idle Alarm/Warning is generated;
•
RDS/RBDS Group Alarm – alarm only for selected groups will be generated.
IMPORTANT NOTE:
running. While there is any user interaction, warning or alarm will not be generated and send. The
Logger starts running once the user logs out of the WEB interface.
Trigger and Release times define the time, which should elapse in order for the received signal
to be defined as low/high/lost or restored/OK. What we recommend is the release time to be bigger
than the trigger time.
NOTE:
When setting Trigger and Release times, have in mind that 01:00 means 1 minute, and
00:01 means 1 second.
NOTE:
In order for the applied settings to be used press the [Save] button, placed on the
bottom right part of the screen.
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
Warnings and alarms are generated only when the Logger mode is
- 73 -
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
Advertisement
Table of Contents
Need help?
Do you have a question about the DB7002 and is the answer not in the manual?
Questions and answers