Getting Started; Connection - DEVA Broadcast DB7002 Maintenance And Operation Instruction Manual

Professional fm/dab/dab+ monitoring receiver

Hide thumbs Also See for DB7002:

Table of Contents

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

Getting Started

In order for the normal operation of the DB7002 to be guaranteed, you will need fulfill the

following conditions:

1. Standard Ethernet 10/100M connection;

2. Correctly assigned Network configuration and device settings.

To make sure that all the conditions are fulfilled please, follow the instructions below.

1. Install the unit on its operation place;

2. Using the provided power cable, connect the unit to the power supply network;

3. Connect the antenna cable to the RF antenna input connector located on the rear panel of

the device;

4. Connect the DB7002 to the TCP/IP network using direct network cable;

- 21 -

Table of Contents

Do you have a question about the DB7002 and is the answer not in the manual?