Changing The Mas Platform; Ibm Eserver Bladecenter Chassis; Table 8 Ibm Xseries 335 Components; Nortel Media Application Server - Nortel MAS Reference Manual

50 Media Application Server platform
Table 8 "IBM xSeries 335 components" (page 50)
components, and operating system of the IBM xSeries 335 platform.
Table 8
IBM xSeries 335 components
Description
2.8 GHz Intel Xeon CPU
1 GB RAM
40 GB EIDE Hard Drive
Fast Ethernet NIC (10/100/1000 Mbps each) 1
Windows 2000 Server operating system
Note: The Dual Fast Ethernet NIC runs at 100 Mbps on this server

Changing the MAS platform

Perform the following steps to upgrade your hardware from the x335 or x336
to the BladeCenter:
•
•
•
•
•

IBM eServer BladeCenter chassis

The IBM eServer BladeCenter (see
(front)" (page
HS20 blade server host boards. Each IBM HS20 blade server is the host for
a Media Application Server application, and service software. Also included
in the IBM eServer BladeCenter is a CD-ROM or floppy disk module that is
accessible to all 14 slots for any local software installation. Up to three IBM
eServer BladeCenters can reside in a single frame.
Copyright © 2007, Nortel Networks
.
Back up the MAS user data on the old server, using the MAS backup
procedure in the Backup and Restore Guide (NN42020-502).
Back up the custom announcements on the old server.
Install the MAS base and application software on the new server.
Restore the user data backup to the new server, following the MAS
restore procedure in the Backup and Recovery Guide (NN42020-502).
Restore the custom announcements backup to the new server.
51)) is a 7U high chassis, that provides slots for up to 14 IBM

Nortel Media Application Server

Media Application Server Planning and Engineering

NN42020-201 01.04 Standard

4.0 27 July 2007
lists the hardware
Figure 7 "IBM eServer BladeCenter
Quantity
2
1
1
2
1