Table of Contents
Advertisement
In the six-card chassis, each filler panel is attached to the chassis with two
1/4-turn fasteners. Remove a filler panel and replace with a POTS splitter card,
as needed. Keep filler panels in all unused slots.
Cabling Overview
The interfaces to both the POTS splitter card and the DSLAM use 50-position
amphenol-type connectors. Each DSL line uses one pair of copper wires. Each
POTS splitter card uses 12 pairs of the 25 pairs on each 50-position connector.
The 12 pairs for the POTS splitter card can be connected directly to the DSLAM
using a straight-through cable or connected directly to the MDF. In order to
directly connect 24 POTS splitter pairs, use a Y-cable to combine 12 pairs from
two POTS splitter cards.
The Y-cable part number is 8000-F1-001.
11
5020-A2-GN10-20
March 1998
Advertisement
Table of Contents
