Table of Contents
Advertisement
Installation into a Rack with Threaded Screw Holes
Installation into a Rack without Threaded Screw Holes
5020-A2-GN10-20
Procedure
After installing the appropriate brackets on the chassis:
1. Determine the preferred placement of the chassis in the rack.
2. Use the four Phillips-head mounting screws provided and a Phillips
screwdriver to install the chassis.
3. Tighten all four screws.
To install the next chassis in the same manner, follow Steps 1 through 3. For a
standard rack installation, chassis can be mounted directly on top of each other.
Procedure
After installing the appropriate brackets on the chassis:
1. Determine the preferred placement of the chassis in the rack.
2. Insert a speed nut onto each mounting rail hole selected and align the hole of
the speed nut with the hole in the rail.
March 1998
7
Advertisement
Table of Contents
