Loewe Individual 55 Manual page 29

n
Individual 40-55
User guide
Initial installation
Setting options for the satellite system (other communal
installation):
Select
single satellite
Please specify here which satellite you receive.
Back with
5634 Select satellite.
Conclude this step (for navigation refer to page 18).
LNB
frequencies
LNB frequency, supply voltage
Please specify the oscillator frequency for your LNB.
If your TV set is connected to a single cable system without an external power supply, you
can connect the antenna supply (13 or 18V/max. 350mA) with „13V" or „18V".
Note: The newly selected parameter in each case must be confirmed with the
ASTRA1 19,2°E low band
Supply voltage
Back with
5634 Select and adapt settings.
OK Adopt settings.
LNC Normally, you do not need to change the values for
frequency high and low band, unless the LNC (LNB) of your
satellite system uses a different oscillator frequency
(important for the frequency display).
Supply If your set is connected to a single-cable system
voltage without external voltage supply, you can connect
the antenna supply (13V or 18V / max. 500mA).
Conclude this step (for navigation refer to page 18).
(Continue with Setting options for all types of
reception on page 31).
Select satellites
Türksat 42°E Eutelsat W2 16°E Atlantic Bird3 5°W
Hellas Sat2 39°E Hot Bird 13°E Telecom2C 5°W
Eutelsat W4 36°E Eurobird 9A 9°E Nilesat 7°W
Eurobird1 28,5°E Eutelsat W3A 7°E Atlantic Bird2 8°W
ASTRA2 28,2°E Sirius2/3 5°E Telecom2D 8°E
ASTRA3 23,5°E Thor2/3 0,8°W Atlantic Bird1 12,5°W
ASTRA1 19,2°E Intelsat10-02 1°W Telestart12 12,5°W
Proceed with
9750 MHz 10000 MHz 10200 MHz
off 13V 18V
Proceed with
- 29 -
button.
OK
10600 MHz