Loewe Individual 55 Manual page 121

n
Individual 40-55
User guide
System settings
Connections
Connect
subwoofer
...
Sound com-
ponents
3 4 Select yes or no for Subwoofer.
If no subwoofer is connected, the front speakers
additionally transmit the sound parts intended for
the subwoofer as far as possible.
Conclude this step (for navigation see page 18) and
proceed to Distance to left hand front speaker.
Distance to
left front
... Sound com-
ponents
speaker
3 4 S et the distance between the left front speaker
and your listening position in 10 cm steps.
Measure the distances from your listening position
to the front, surround, and centre speakers respec-
tively. The digital audio decoder calculates delay
times from this for the loudspeaker signals, so that
these reach the listener simultaneously.
8 proceed to the respective other speakers (right
front speaker, left surround speaker, right
surround speaker, centre speaker and subwoofer)
and also
3 4 The selected speaker will be coloured blue.
After setting the distance to the subwoofer.
8 proceed to Adjust speaker level.
Connect subwoofer Connect subwoofer
Please specify here whether you want to
TV
additionally connect a subwoofer for very good
100Hz 90Hz
bass reproduction.
100Hz
no yes
Back with Proceed with
Distance to left front speaker Distance to left front speaker
Please enter the distance of the left front speaker
TV
from your listening position here.
4,0m 3,0m 4,0m
3,9m
2,0m 2,0m
0.1 m 4.0 m 10.0 m
Back with Proceed with
- 121 -
Adjust
speaker level
100Hz
100Hz
3 4 A djust the volume for the speaker.
8 Proceed to next speaker or
5 6 select speakers manually.
After adjustment of the last speaker.
8 Proceed to Subwoofer phase.
Subwoofer
phase
Switch a station or a DVD player playing music to music
playback.
3 4 T est both values (0º and 180º) and select the
Conclude this step (for navigation refer to page 18).
This ends the sound components wizard for connect-
ing and setting up a speakers system.
Adjust speaker level
You hear a sound from every speaker one after
... Sound com-
ponents another. But you can also select the speakers
manually with the menu control buttons up/down.
Set the volume for the respectively active speaker
shown in blue so that you get approximately the
same volume impression from all the speakers.
-12 dB 0 dB
Back with Proceed with
For balanced audio reproduction all speakers should
be set to the same volume level. A noise signal will
be reproduced automatically on each speaker in
succession. Adjust every speaker to equal perceived
volume from your listening position. The selected
speaker will be coloured blue.
Subwoofer phase
... Here you can reverse the phase of your subwoofer. Test both values in music
Sound com-
reproduction and then select the one with which you get a better bass
ponents
reproduction.
0° 180°
Back with Finish wizard with
one with which you get a clearer bass reproduc-
tion from your listening position.
TV
0dB 0dB 0dB
0dB
0dB 0dB
+12 dB