Loewe Individual 55 Manual page 25

n
Individual 40-55
User guide
Initial installation
Setting options for DVB-S reception:
If you have not selected DVB-S antenna in the list of available anten-
nas: Proceed to Setting options for all types of reception on
page 31.
Select
satellite
installation
Please define which satellites you receive or which satellite equipment you use.
Single satellite
2 satellites on 22 kHz switchbox
2 satellites on toneburst switch
Max. 4 satellites on DiSEqC multiswitch
DiSEqC one cable communal system
Other communal installation
Indietro con
56 Selecting the satellite system.
Specify how you receive which satellite(s) (single
satellite or type of satellite system). Ask your
dealer in this regard.
The normal DVB-S settings are derived from the
selection of the location and do not need to be
changed in most cases.
Single Reception of a single satellite via a connected LNC
satellite (LNB). See page 26 for settings.
2 satellites Reception of two different satellites with two LNCs
on 22 kHz (LNBs) which are connected to the TV set by a 22
switchbox kHz switchbox. See page 26 for settings.
2 satellites Reception of two different satellites with two LNCs
on toneburst (LNBs) which are connected to the TV set by a tone-
switch burst switch. See page 26 for settings.
Max. 4 The TV set controls a DiSEqC multiswitch to which
satellites up to four LNCs (LNBs) for different satellites are
on DiSEqC connected. See page 27 for settings.
multiswitch
DiSEqC Select setting if the TV set is connected to a DiSEqC
one cable single-cable system (according to EN 50494). Several
communal Sat receivers can be connected to one Sat cable. See
system page 28 for settings.
other Select setting if the TV set is connected to a single-
communal cable system (without DiSEqC). Several Sat recei-
installation vers can be connected to one Sat cable. Contrary
to a DiSEqC one cable communal system there are
restrictions in the range of certain reception frequen-
cies in "common" single-cable community systems.
See page 29 for settings.
Conclude this step (for navigation refer to page 18)
(Proceed to the appropriate page of the satellite
system).
Select satellite installation
Avanti con
- 25 -