Loewe Individual 55 Manual page 120

n
Individual 40-55
User guide
System settings
Connections
Adjusting the speaker system
Sound playback via ... – Speaker system
Enter here that you want to hear the TV sound over a speaker system. If
you connect active speakers, please use the setting Speaker system.
For information on navigation within the wizard refer to General
information on menu operation on page 18.
How to connect a speaker system to the TV set is described on
page 130.
When setting up the speaker system for the first time, the configu-
ration starts with the step Connect front speakers (see below).
Speaker system was selected in the Sound components wizard
(see page 119).
Configuration/
modification
... Sound com-
ponents
If you want to set up or change a speaker system:
3 4 Select Configuration/modification.
If nothing has been set yet, the factory settings
or otherwise the last set values are displayed.
Conclude this step (for navigation refer to page 18).
Configuration/
modification
... Sound com-
ponents
6 5 Select Complete.
Conclude this step (for navigation see page 18) and
continue to connect and set the front speakers.
Connect
front ... Sound com-
ponents
speakers
3 4 Select External speakers or TV speakers.
6 F or External speaker go to the frequency bar
below and
3 4 s et the lower limit frequency of the external
front speakers in steps of 10 Hz.
Speaker system Speaker system
Please specify whether you want to change the illustrated setting of your
speaker system or whether all existing settings are to be reset to the values of the
delivery state.
Note: The newly selected parameter must be confirmed with the button.
OK
Components Distances Level
TV
TV TV
100Hz 90Hz 100Hz
4,0m 3,0m 4,0m 0dB 0dB 0dB
0dB
3,9m
100Hz 100Hz
2,0m 2,0m 0dB 0dB
Configuration/modification Reset to factory settings
Back with
Configuration/modification of speaker system Configuration/modification of speaker system
Please specify here whether you wish to fully set up a speaker system for the first
time or wish to completely modify an existing one or whether you wish to restrict
yourself to changing the speaker connections, changing the distances of the
speakers from the listening position or altering the individual volume levels.
Note: The newly selected parameter must be confirmed with the button.
OK
Complete
Connections only
Distances only
Levels only
Back with Cancel with
Connect front speakers
Please specify here whether you wish to use the TV
speakers or external front speakers as front
100Hz 100Hz 100Hz
speakers. In the latter case, their lower limit
frequency must be entered in Hz (see instruction
manual and technical data of the speakers). 100Hz 100Hz
TV speakers External speakers
20 Hz 100 Hz 200 Hz
Back with Proceed with
- 120 -
Select the start value of the frequency response of
the speakers for the correct setting (e.g., 50Hz for
t h e s p e c i f i c a t i o n " Fre q u e n c y re s p o n s e
50-20,000Hz"). See the technical data of the speak-
ers for the value.
You can replace the external front speakers by the
TV speakers if necessary. In this case, TV speakers.
Then, the TV speakers transmit the sound of the
front speakers.
Conclude this step (for navigation see page 18)
surround speakers
Connect
... Sound com-
surround
ponents
speakers
3 4 Select yes or no for the external surround speakers.
In case, external speakers were chosen as surround
speakers:
6 Select frequency bar
3 4 s et the lower limit frequency of the surround
speakers in 10 Hz steps.
Select the start value of the frequency response of
the speakers for the correct setting.
Conclude this step (for navigation see page 18)
centre speaker
Connect
centre
... Sound com-
ponents
speaker
3 4 Select whether the TV speakers or an External
speaker is to reproduce the centre sound or no
if no centre speaker is connected.
If no centre speaker is connected, the front speakers
also transmit the centre sound parts additionally.
6 F or External speaker go to the frequency bar
below and
3 4 s et the Lower Limit Frequency of the external
front speakers in steps of 10 Hz.
Select the start value of the frequency response of
the speakers for the correct setting.
Conclude this step (for navigation see page 18) and
continue to connect the Subwoofer.
Connect surround speakers Connect surround speakers
Please specify here whether you want to connect
external surround speakers. In this case, their lower
100Hz 100Hz 100Hz
limit frequency must be entered in Hz (see
instruction manual and technical data of the
speakers). 100Hz 100Hz
no yes
20 Hz 100 Hz 200 Hz
Back with Proceed with
Connect centre speaker Connect centre speaker
Please specify here whether you wish to use a
TV
centre speaker. This function can be fulfilled by the
100Hz 90Hz 100Hz
TV speakers, if they are not used as front speakers,
or by an external speaker. In the latter case, its
lower limit frequency must be entered in Hz (see 100Hz 100Hz
instruction manual and technical data of the
speakers).
no TV speakers External speaker
Back with Proceed with
continued on the next page
Ž